document number: 88622 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 15-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 miniature high voltage glass passivated rectifier gi1-1200gp thru gi1-1600gp vishay general semiconductor features ? superectifier structure for high reliability application ? cavity-free glass- passivated junction ? low forward voltage drop ? typical i r less than 0.1 a ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 275 c max. 10 s, per jesd 22-b106 ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for use in high voltage rectification of power supplies, inverters, converters, freewheeling diodes applications mechanical data case: do-204ac, molded epoxy over glass body molding compound meets ul 94 v-0 flammabi lity rating base p/n-e3 - rohs compliant, commercial grade base p/nhe3 - rohs compli ant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 cla ss 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end primary characteristics i f(av) 1.0 a v rrm 1200 v to 1600 v i fsm 30 a i r 10 a v f 1.1 v t j max. 175 c do-204ac (do-15) superectifier ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol gi1-1200gp gi1-1400gp gi1-1600gp unit maximum repetitive pe ak reverse voltage v rrm 1200 1400 1600 v maximum rms voltage v rms 840 980 1120 v maximum dc blocking voltage v dc 1200 1400 1600 v maximum average forward rectified current 0.375" (9.5 mm) lead length at t a = 75 c i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a operating junction and storage temperature range t j , t stg - 65 to + 175 c
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 88622 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 15-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 gi1-1200gp thru gi1-1600gp vishay general semiconductor note (1) pulse test: 300 s pulse width, 1 % duty cycle note (1) thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, pcb mounted note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - maximum non-repetitive pe ak forward surge current electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol gi1-1200gp gi1-1400gp gi1-1600gp unit maximum instantaneous forward voltage i f = 1.0 a v f (1) 1.1 v i f = 3.14 a 1.3 maximum reverse current rated v r t a = 25 c i r (1) 10 a t a = 100 c 100 maximum reverse recovery time i fm = 20 ma, i rm = 2 ma t rr 25 s reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a typical t rr 0.7 s maximum 1.5 maximum forward recovery time i fm = 20 ma t fr 1.0 s typical junction capacitance 4.0 v, 1 mhz c j 15 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol gi1-1200gp gi1-1400gp gi1-1600gp unit typical thermal resistance r ? ja (1) 55 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode gi1-1200-e3/54 0.425 54 4000 13" diam eter paper tape and reel gi1-1200-e3/73 0.425 73 2000 ammo pack packaging gi1-1200he3/54 (1) 0.425 54 4000 13" diameter paper tape and reel gi1-1200he3/73 (1) 0.425 73 2000 ammo pack packaging 20 40 60 80 100 120 140 160 180 0 0.25 0.50 0.75 1.00 1.25 1.50 average forwar d rectified current (a) ambient temperature (c) 60 hz re s i s tive or inductive load 0.375 " (9.5 mm) lead length capacitive load s 5.0 10 20 = i pk i av = i pk i av 1 10 100 0 10 20 30 40 50 number of cycle s at 60 hz peak forwar d s urge current (a) t a = 25 c no load condition t j = t j max. rated load condition s 8.3 m s s ingle half s ine-wave (jedec method)
document number: 88622 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 15-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 gi1-1200gp thru gi1-1600gp vishay general semiconductor fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse characteristics fig. 5 - typical j unction capacitance package outline dimensions in inches (millimeters) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 10 1 pul s e width = 300 s 1 % duty cycle in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) t j = 150 c t j = 25 c pul s e width = 300 s 1 % duty cycle 0 20 40 60 80 100 0.01 0.1 1 10 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e leakage current (a) t j = 125 c t j = 25 c t j = 75 c 100 1 10 100 1 10 rever s e voltage (v) junction capacitanc e (pf) t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p do-204ac (do-15) 0.034 (0.86) 0.028 (0.71) dia. 0.140 (3.6) 0.104 (2.6) dia. 1.0 (25.4) min. 0.300 (7.6) 0.230 (5.8) 1.0 (25.4) min.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
